ventilation-systems

HRV 1 Q Plus

Highly energy efficient heat recovery ventilation unit

Primarily for use in dwellings with three wet rooms or fewer

HRV 1 Q PlusThe revolutionary ultra compact HRV1 Q Plus continuously running whole house ventilation unit with heat recovery is independently tested by the BRE and is EST Best Practice compliant. The HRV1 Q Plus gives cutting edge performance usually only associated with much larger and more costly products.

The combination of very low power consumption and a highly efficient
heat exchanger is specifically designed to enhance SAP performance via Appendix Q, yet small enough to be easily incorporated into apartments and smaller houses where space is at a premium. HRV1 Q Plus units are the unit of choice for a number of major UK house builders.

Features & Benefits

  • Very compact unit can be fitted in small cupboards or loft spaces
  • Very low power consumption / specific fan power
  • Highly efficient heat exchanger; up to 91%
  • Summer Mode to help reduce dwelling overheating
  • Intelligent controller, quick and easy to commission.
  • Fully adjustable boost overrun timer 0-60 minutes; can be used with non-latching (momentary) switches to prevent from being accidently left in boost mode
  • Accepts 100mm or 125mm diameter ducting, no adaptors required
  • Intelligent frost protection, stepped reduction of supply air rates prevents freezing
  • Setback option for unoccupied periods
  • Demand Control Ventilation ready
  • Volt free switching control
  • G3 filters as standard, G4 & F7 options
  • Very lightweight for easy handling
  • Quick fix via mounting bracket
  • Patented

 

HRV 1 Q Plus
Exhaust Terminal
Configuration*
Fan Speed
Setting
Specific Fan
Power
(W/l/s)
Heat
Exchange
Efficiency (%)
Energy Saving Trust Best
Practice Performance
Compliant
Kitchen + 1 additional wet room 100% variable 0.70 91 Yes
Kitchen + 2 additional wet rooms 100% variable 0.70 89 Yes
Kitchen + 3 additional wet rooms 100% variable  0.72 89  Yes
Kitchen + 4 additional wet rooms 100% variable 0.90 88 Yes
Kitchen + 5 additional wet rooms 100% variable 0.99 87 Yes

Figures taken from the BRE Test Results.

*Number of wet rooms is based on SAP Q test criteria and does not correlate directly with regulatory performance requirements.

Noise Performance - details on request

Description

Titon HRV1 Q Plus whole house central mechanical supply and extract unit with heat exchanger.

Product Code

TP400A
G3 filters: XP40032/099
G4 filters: XP46022/099

 

Standards

Conforms to requirements of UK statutory Building Regulations and Technical Standards for Ventilation. SAP Appendix Q tested (www.sap-appendixq.org.uk)

Exceeds requirements of Building Regulations Approved Document L (England & Wales)

EU RoHS Directive compliant

Conforms to requirements of EC council directives relating to Electromagnetic Compatibility and Electrical Safety: 2006/95/EC (LVD), 2004/108/EC (EMC) EN 60335-1:2002/A2:2006, EN 60335-2-80:2003/A1:2004. CE Marked

Other non-UK info available on request

Specification

Dimensions: 600mm wide x 430mm high (excluding ports) x 285mm deep (295mm with mounting bracket)

Weight: 16kg

Finish: White Paint.

Housing: Zintec sheet steel housing,
powder coated white

Internals: Expanded polypropylene (EPP)

Heat exchanger: Polystyrene

Internal insulation: Closed cell foamed
Nitrile rubber, class ‘O’ fire rating

Standard Filters: Grade G3 synthetic filters, flame resistance to BS5588

Guarantee period: 3 years (UK only)

Electrical: 230V 50Hz

Installation: Install in accordance with Good Practice, such as the Domestic Ventilation Compliance Guide (England & Wales) and the Residential Ventilation Association recommendations

Maintenance: Annual Service and filter
change recommended. Uses long life
washable grade G3 filters.

More information

ventsales@titon.co.uk / 01206 713800