ventilation-systems

CME 1 Q Plus

High efficiency Central Mechanical Extract Unit

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED WITH THE CME2 Q PLUS. HOWEVER TO OBTAIN TECHNICAL DOCUMENTATION PLEASE CLICK ON THE DOCUMENTATION TAB.

Primarily for use in dwellings with six wet rooms or fewer

cme centralised mechanical extract unit

The CME1 Q Plus is a revolutionary centralised mechanical extract unit. The combination of aesthetic smooth lines, unique tilted impeller and single level ports provides the ideal solution for hidden ceiling installation in flats and apartments.

A number of innovative features save both costs and installation time. Including our two part installation option. First fix unit can be installed on site with ducting, then second fix unit is despatched from our warehouse ready for final installation and unit commissioning.

Additionally the unit has a very large duty range over 400m³/hr at reasonable static pressure, this means the unit will provide System 3 ADF ventilation for dwellings primarily up to 300m² floor area.

The CME1 Q Plus is now available with an integrated humidity sensor option.

 

Features & Benefits

  • High energy efficiency levels, via Electronically Commutated (EC motor)
  • Very low power consumption / specific fan power
  • Compact – unit is small and low in profile, can be fitted in airing cupboards, cupboards or loft spaces
  • Easy installation due to innovative sub-assembly and unique packaging design
  • Optional two part installation
  • Performs to high levels through rectangular ports; does away with need for round to rectangular adaptors, saving cost, reducing joints and installation time
  • Optional adjustable humidity sensor (between 55%RH & 85%RH) triggers boost speed
  • Duct ports on one level, lessening need for unnecessary bends in ducting, saving cost, reducing joints and installation time
  • Ideal for central mechanical ventilation in refurbishment of single floor dwellings where there is only space for rectangular ducting
  • Low unit noise
  • Fully adjustable boost overrun timer 0-30 minutes
  • Can accept either 204mm x 60mm or 110mm x 54mm ducting
  • Unit can be cleaned and serviced without disturbing ducting
  • Unique enclosure with 204mm x 60mm spigots, on one level, ideal for low profile ceiling mounting
  • For use in conjunction with Titon trickle vents
  • Hidden fixings
  • Quick and easy commissioning
  • Demand control ventilation ready
  • Wide duty range
  • Patent applied for

Click here to read case studies on the successful application of the CME1 Q Plus.

System 3

THIS PRODUCT HAS BEEN DISCONTINUED, HOWEVER TO OBTAIN TECHNICAL DOCUMENTATION PLEASE CLICK ON THE DOCUMENTATION TAB.

 

Exhaust Terminal
Configuration*
Fan Speed
Setting
Specific Fan
Power
(W/l/s)
Energy Saving Trust Best
Practice Performance
Compliant
Kitchen + 1 additional wet room 100% variable 0.20 Yes
Kitchen + 2 additional wet rooms 100% variable 0.18 Yes
Kitchen + 3 additional wet rooms 100% variable 0.18  Yes
Kitchen + 4 additional wet rooms 100% variable 0.19 Yes
Kitchen + 5 additional wet rooms 100% variable 0.22 Yes
Kitchen + 6 additional wet rooms 100% variable 0.25 Yes

Figures taken from the BRE Test Results.

*Number of wet rooms is based on SAP Q test criteria and does not correlate directly with regulatory performance requirements.

Test results available for use with 110 x 54mm ducting.

Noise Performance - click here for the acoustic test results.

 

Description

Titon CME1 Q Plus whole house central
mechanical extract ventilation unit.

Product Code

TP300A
TP300HA (with Humidity Sensor)
TP325 First fix unit
TP301A Second fix unit
TP301HA Second fix unit
(with Humidity Sensor)

Standards

Conforms to requirements of UK statutory Building Regulations and Technical Standards for Ventilation and BRE 398.
SAP Appendix Q tested
(www.sap-appendixq.org.uk).

Exceeds requirements of Building
Regulations Approved Document L
(England & Wales).

EU RoHS Directive compliant.

Conforms to requirements of EC council
directives relating to Electromagnetic Compatibility and Electrical Safety:
2006/95/EC (LVD), 2004/108/EC (EMC)
EN 60335-1:2002/A2:2006, EN 60335-
2-80:2003/A1:2004. CE Marked.

Other non-UK info available on request.

Specification

Dimensions (including ports): 390mm wide x 450mm long x 252mm high

Weight: 5kg.

Finish: Light grey / dark grey

Housing: Talc Filled Polypropylene.

Guarantee period: 3 years (UK only)

Electrical: 230V ~ 50/60Hz, 3A fuse

Installation: Install in accordance with
Residential Ventilation Association Good
Practice recommendations - details on
request.

Maintenance: See Product Manual.

More information

ventsales@titon.co.uk / 01206 713800