aurastat® V & VT

HRV Q Plus Controller BUY NOW

For use with Titon HRV Q Plus Range

aurastat controlleraurastat® is a low voltage intelligent controller with LCD display for commissioning and monitoring a Titon HRV unit. It is wired to, but sited remotely from the unit.

aurastat® is controlled via buttons that configure and monitor the HRV using five different menu systems:

  • Monitor and control 'Run' Menu
  • User set up 'SETUP1'
  • Service and Set up 'SETUP2'
  • Commissioning and Installation 'SETUP3'
  • Reset 'RESET4'

The display is a back lit 90mm LCD screen which combines a mixture of icons, text and figures.

aurastat® can be used to set and control a number of features including:

  • Boost alert timer
  • Summer Mode, Summer Bypass and SUMMERboost® settings
  • Duct heater settings
  • Room sensor set points
  • Internal humidity settings
  • Continuous, boost and set back speeds

The home occupant has access to set a number of features themselves, such as:

  • 24 hour clock
  • Day of week display
  • Back light brightness
  • Boost overrun timer
  • Boost delay timer
  • Boost inhibit times
  • Internal humidity sensor set point
  • Filter change alert interval and reset

aurastat®VT has the additional features of programmable timers that are used to setback or boost the ventilation rates at specific times.

aurastat® is used to set up & control specific versions of Titon's HRV units. For compatability please contact us on +44 (0)1206 814879 or

Features and Benefits:

  • User friendly interface showing system status, fan speeds/air temperature and more
  • Boost alert triggers a warning message when the HRV has been left in boost
  • Grants the occupant accessibility and control
  • PIN protected menu structure for commissioning
  • Low power consumption
  • Individual supply / extract fan speed settings
  • Separate kitchen and wet room boost function settings
  • Demand control features via 2 x 0-10V DC proportional sensor inputs (power supplied from main PCB, RH, CO2, Air quality and temperature)
  • Fully automatic summer bypass
  • Intelligent frost protection
  • Boost Delay
  • Boost inhibit within selected time zones
  • Running hours recorder
  • Internal MVHR humidity sensor setpoint
  • Fully adjustable SUMMERboost® speed (linked to automatic bypass)
  • Programmable timer option

System 4

aurastat® is used to set up & control specific versions of Titon’s HRV units, all of which are detailed below:

  • HRV 1.25 Q Plus Eco TP416B
  • HRV 1.35 Q Plus Eco TP418B
  • HRV 1.75 Q Plus Eco TP404B
  • HRV 2 Q Plus Eco TP411B
  • HRV 2.85 Q Plus Eco TP417B
  • HRV 3 Q Plus Eco TP412B
  • HRV 10 Q Plus TP480B
  • HRV 10M Q Plus TP481B


Titon aurastat® HRV controller for commissioning and monitoring a Titon HRV Q Plus unit

Product Code

aurastat®V - TP526

aurastat®VT -TP534


Conforms to requirements of EC council directives relating to Electromagnetic Compatibility and Electrical Safety: 2006/95/EC (LVD), 2004/108/EC (EMC) EN 60335-1:2002/A2:2006, EN 60335-2-80:2003/A1:2004
CE marked
Patented and Registered design


Dimensions: 106mm wide x 141mm high x 25mm deep

Weight: 185g

Finish: High gloss finish

Materials: ABS

Guarantee period: 3 years (UK Only)

Electrical: 12VDC

More information 01206 81487901206 814879