ventilation-systems

HRV 3 Q Plus - Enthalpy

Ultra energy efficient MVHR with Enthalpy Energy Recovery

For use in large dwellings


Suitable for larger dwellings, the HRV3 Q Plus continuously running whole-house ventilation unit with heat recovery gives cutting edge performance usually only associated with much larger and more costly products.

The combination of very low power consumption and a highly efficient heat exchanger is small enough to be easily incorporated into medium sized dwellings.

The counter flow enthalpy heat exchanger has a selectivepolymer membrane film to achieve low air leakage levelswhile providing moisture recovery from the exhaust air. These models are ideal for living areas with low humidity, avoiding frost build up at low temperatures, they also have an antimicrobial membrane and long life cycle.

The Eco versions offer a 100% airflow diverting SummerBypass. It also includes intelligent humidity options and can be fitted with the auralite® status indicator or the auramode®aurastat® or aura-tTM controllers.

Features & Benefits

  • Constant volume fans
  • Highly efficient enthalpy counter flow heat exchanger
  • Intelligent controller, quick and easy to commission
  • Fully adjustable boost overrun timer 0-60 minutes; can be used with non-latching (momentary) switches to prevent unit from being accidentally left in boost mode
  • Accepts 125mm or 150mm diameter ducting, no adaptors required
  • Independent fan adjustment
  • Intelligent automated control of summer bypass, frost protection and humidity functions
  • Setback facility to reduce ventilation where local regulations allow
  • Lightweight for easy handling
  • Volt free switching control
  • G3 filters as standard, G4 as an option
  • Re-usable plastic filter frame
  • Quick fix mounting bracket
  • Patented
  • Independent fan adjustment
  • Effective in reducing pollutants in the home and improving Indoor Air Quality (IAQ), therefore reducing the risk of Toxic Home Syndrome

Eco BE Models;

  • Compatible with aura range; aurastat®auramode®aura-tTM and auralite® (TP519) controllers
  • Available in left and right handed configurations
  • Duct heater control (requires independent power supply)
  • BMS compatible via RS485

For explanations of HRV features, click here.

 

System 4

Heat Cell

Technical Data (Typical conditions at 140m³/h)

  • Heat change rate 80%
  • Degree of moisture change 70%
  • Leakage at 100 Pa < 1%
  • Temperature stability - 25°C up to 65°C

Features & Benefits

  • No transfer of gases or pollutants - only heat and steam are transferred by the membrane
  • Long life cycle - permanent transmission parameters
  • Minimum leakage
  • Optimum flow behaviour, low pressure loss
  • Frost- and heat-proof
  • High, sensitive and latent transmission rate
  • Antimicrobial (Microban® - integrated hygiene protection)
  • Can be cleaned using water
  • European manufactured heat cell
  • Available in sizes HRV1.35, 2, 3 & 10.25

 

Drawings & Dimensions

 

 

 

Product Code

HRV3 Q Plus HMB Eco Enthalpy auramode®aurastat® and aura-tTM controller or auralite® indicator ready  
TP412BE/LH (left hand config) or
TP412BE/RH (right hand config)- Energy Rating A

Filters:
XP40133/099 - G3 Filters fitted as standard
XP46133/099 - G4 Filters fitted on request
XP46222/099 - G3/F7 Filters fitted on request
XP46232/099 - G3/F7 Filters fitted on request

Standards

EU RoHS Directive compliant

Conforms to requirements of EC council directives relating to Electromagnetic Compatibility and Electrical Safety: 2006/95/EC (LVD)
2004/108/EC (EMC)
EN 60335-1:2002/A2:2006
EN 60335-2-80:2003/A1:2004
CE Marked.
Other non-UK info available on request

 

Specification

Dimensions: 715mm wide x 490mm high (excluding ports) x 415mm deep (426mm with mounting bracket)
Weight: 28kg
Finish: White Paint
Housing: Zintec sheet steel housing, powder coated white
Internals: Expanded polypropylene (EPP)
Heat Exchanger: Selective polymer membrane film
Internal insulation: Closed cell foamed Nitrile rubber, class ‘O’ fire rating
Standard filters: Grade G3 synthetic filters
Guarantee period: 3 years (UK only)
Electrical: 230V ~ 50/60Hz, 3A fuse
Installation: Install in accordance with Good Practice, such as the Domestic Ventilation Compliance Guide (England & Wales) and the Residential Ventilation Association recommendations Maintenance: Service and filter clean/replacement subject to local environment - see Product Manual

More information

ventsales@titon.co.uk / 01206 713800

 

 Nominal fan performance

HRV3 Q Plus performance graph

All units offer 100% variable speed control.
*@FID (0 Pa)

 Acoustic Data

HRV3 Q Plus acoustic data