ventilation-systems

Intermittent Fans - Centrifugal

For use in residential applications

Intermittent extract fan - Centrifugal

Ideal for air-extraction in bathroom and small premises. A powerful extract fan, designed to overcome the resistances of long ducting systems. Units can be wall/panel and ceiling mounted: designed for surface or flush (plasterboard) installation.

Version

Humidistat-timer - The fan is provided with an electronic circuit having a humidity sensor on board (adjustable from 50% to 95% RH) and a timer, adjustable from ± 1’ to 25’. Operation: when the percentage of relative humidity is higher/lower than the pre-set threshold, the fan is automatically activated/deactivated. After switching off, the fan continues to run for the pre-set period of time.

Features & Benefits

  • IPX4 protection degree
  • Aesthetic front flat cover for modern interior design easily removed for cleaning
  • Removable filter in PP to protect the impeller and the motor. Easy to be removed for cleaning
  • Integral back-draught shutter to prevent air flowing back into the room when the fan is off
  • Improved performance thanks to the unique air straightener to optimise performance and reduce power consumption
  • Totally recyclable plastic components, environmentally friendly.
  • Double insulated: no earth connection is required
  • Forward curved centrifugal impeller, providing enhanced aerodynamic properties, low noise and increased efficiency.
  • Electrical supply 220-240 V ~ 50-60Hz

Intermittent extract fan - Axial

System 1

Drawing and Dimensions

 

 

 

 

 

 

Electrical

Product Codes

TIFC100HT, Intermittent Fan Centrifugal Ø100mm Humidity and Timer - TP251HT 

Standards

Designed and manufactured in accordance with EN60335-2-80 (Low Voltage Directive) and the EMC Directive (Electromagnetic Compatibility).

Air performance measured according to ISO 5801 at 230V 50Hz, air density 1.2 Kg/m3. CE marked.

Specification

Finish: White gloss RAL 9010, UV resistant

Materials: Shock-proof ABS casing

Weight: 1.87 Kg

Guarantee period: 2 years (parts only)

Electrical: 220-240 V ~ 50Hz

Installation: Install in accordance with regulatory requirements, such as the Domestic Ventilation Compliance Guide (England & Wales) and the Residential Ventilation Association recommendations.

Maintenance: Service, clean, replace subject to local environment - see product manual.

 

Additional data

Ceiling IPX4 Kit

Gasket made of EPDM rubber to guarantee the IPX4 degree of protection against moisture in case of ceiling installations.

TP206/Ø150 - TIFC100HT

More information

ventsales@titon.co.uk / 01206 713800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Performance