ventilation-systems

HRV 1 Q Plus

Mechanical Ventilation with Heat Recovery Unit (MVHR)

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED WITH THE HRV 1.25 Q Plus. HOWEVER TO OBTAIN TECHNICAL DOCUMENTATION PLEASE CLICK ON THE DOCUMENTATION TAB.

Primarily for use in dwellings with three wet rooms or fewer

HRV 1 Q Plus MVHR Unit

The ultra compact HRV1 Q Plus continuously running whole house ventilation unit with heat recovery is independently tested by the BRE.

Combining very low power consumption and a highly efficient heat exchanger, the HRV 1 Q Plus is specifically designed to enhance SAP performance via Appendix Q, yet small enough to be easily incorporated into apartments and smaller houses where space is at a premium. HRV1 Q Plus Mechanical Ventilation with Heat Recovery units are the unit of choice for a number of major UK house builders.

Features & Benefits

  • Very compact unit
  • Very low power consumption/specific fan power of 0.70 W/l/s
  • Highly efficient heat exchanger; up to 91%
  • Accepts 100mm or 125mm diameter ducting, no adaptors required
  • Intelligent frost protection, stepped reduction of supply air rates prevents freezing
  • G3 filters as standard, G4 as an option, more information available here
  • Fully adjustable boost overrun timer 0-60 minutes; can be used with non-latching (momentary) switches to prevent unit from being accidently left in boost mode
  • Setback setting to reduce ventilation where local regulations allow
  • Volt free switching control
  • Summer Mode as standard
  • Intelligent controller, quick and easy to commission
  • Very lightweight for easy handling
  • Re-usable plastic filter frames
  • Quick fix via mounting bracket
  • Patented design
  • Independent fan adjustment
  • Effective in reducing pollutants in the home and improving Indoor Air Quality (IAQ), therefore reducing the risk of Toxic Home Syndrome. 

For case studies on the successful application of the HRV 1 Q Plus please click here.

For explanations of HRV features, click here.
For further details specific to this product, please see the manual here.

 

 

 

System 4

 

 

 

 

 

Exhaust Terminal
Configuration*
Fan Speed
Setting
Specific Fan
Power
(W/l/s)
Heat
Exchange
Efficiency (%)
Kitchen + 1 additional wet room 100% variable 0.70 91
Kitchen + 2 additional wet rooms 100% variable 0.70 89
Kitchen + 3 additional wet rooms 100% variable 0.72 89
Kitchen + 4 additional wet rooms 100% variable 0.90 88
Kitchen + 5 additional wet rooms 100% variable 0.99 87

Figures taken from the BRE Test Results.

*Number of wet rooms is based on SAP Q test criteria and does not correlate directly with regulatory performance requirements.

Noise Performance  - click here for the acoustic test results.

 

 

 

Product Code

HRV1 Q Plus - TP400A - Energy Rating A
Filters:
XP40032/099 - G3 Filters fitted as standard

XP46022/099 - G4 Filters fitted on request

Standards

Conforms to requirements of UK statutory Building Regulations and Technical Standards for Ventilation and BRE 398.
SAP Appendix Q tested
(www.sap-appendixq.org.uk).
Exceeds requirements of Building
Regulations Approved Document L
(England & Wales).
EU RoHS Directive compliant.
Conforms to requirements of EC council
directives relating to Electromagnetic Compatibility and Electrical Safety:
2006/95/EC (LVD)
2004/108/EC (EMC)
EN 60335-1:2002/A2:2006
EN 60335-2-80:2003/A1:2004.
CE Marked.
Other non-UK info available on request.
Visit www.titon.co.uk for Passivhaus evaluation.

Specification

Dimensions: 600mm wide x 430mm high (excluding ports) x 285mm deep (295mm with mounting bracket)
Weight: 16kg
Finish: White Paint.
Materials:

Housing: Zintec sheet steel housing,
powder coated white
Internals: Expanded polypropylene (EPP)
Heat exchanger: Polystyrene
Internal insulation: Closed cell foamed Nitrile rubber, class fire rating
Standard Filters: Grade G3 synthetic filters, flame resistance to BS5588
Guarantee period: 3 years (UK only)
Electrical: 230V ~ 50/60Hz, 3A fuse
Installation: Install in accordance with Good Practice, such as the Domestic Ventilation Compliance Guide (England & Wales) and the Residential Ventilation Association recommendations
Maintenance: Service and filter clean/replacement subject to local environment - see Product Manual.

More information

ventsales@titon.co.uk / 01206 713800

 

Nominal fan performance

 

All units offer 100% variable speed control.
*@FID (0 Pa)