ventilation-systems

HRV 1.25 Q Plus

Mechanical Ventilation with Heat Recovery unit (MVHRBUY NOW)

For use in small to medium sized dwellings

HRV 1.25 Q Plus MVHR Unit
The enhanced capacity ultra compact HRV1.25 Q Plus continuously running whole house ventilation unit with heat recovery is independently tested by the BRE.

Combining ultra low power consumption and a highly efficient heat exchanger, the HRV1.25 Q Plus is specifically designed to enhance SAP performance via Appendix Q - yet the unit remains small enough to be easily incorporated into apartments and smaller houses where space is at a premium.

The Eco versions offer a 100% airflow diverting Summer Bypass, recognised and listed in the UK Product Characteristics Database. They also include intelligent humidity options and can be fitted with the auralite® status indicator or the auramode® and aurastat® controllers.

Features & Benefits

  • Extremely compact
  • Extremely low Specific Fan Power of 0.53 W/l/s
  • Highly efficient heat exchanger; up to 91%
  • Accepts 100mm or 125mm diameter ducting, no adaptors required
  • Intelligent frost protection, stepped reduction of supply air rates prevents HRV unit from freezing
  • G3 filters as standard, G4 as an option, more information available here
  • Fully adjustable boost overrun timer 0-60 minutes; can be used with non-latching (momentary) switches to prevent unit from being accidently left in boost mode
  • Setback facility to reduce ventilation where local regulations allow
  • Volt free switching control
  • Removable airtight filter covers for easy filter maintenance (Standard and Eco models)
  • Quick fix mounting bracket
  • Patented features and design
  • Independent fan adjustment
  • Intelligent controller, quick and easy to commission
  • Re-usable plastic filter frames
  • Effective in reducing pollutants in the home and improving Indoor Air Quality (IAQ), therefore reducing the risk of Toxic Home Syndrome.

Basic Version;

  • Summer Mode

Eco Versions;

  • Intelligent Summer Bypass & humidity controls
  • SUMMERboost® facility

Eco HMB Models;

  • Compatible with auralite® status (TP518) indicator
  • Quick access filter doors as standard

Eco B Models;

  • Compatible with aura range; aurastat®auramode® and auralite® (TP519) controllers
  • Duct heater control (requires independent power supply)
  • Available in left and right handed configurations
  • BMS compatible via RS485

For explanations of HRV features, click here.

For further details specific to this product, please see the product manuals: TP406A, TP406HMB and TP416B.

HRV 1.25 Q Plus MVHR Unit with duct

System 4

 

 

 

 

 

 

 

Exhaust Terminal
Configuration*
Fan Speed
Setting
Specific Fan
Power
(W/l/s)
Heat
Exchange
Efficiency (%)
Kitchen + 1 additional wet room 100% variable 0.53 91
Kitchen + 2 additional wet rooms 100% variable 0.6 89
Kitchen + 3 additional wet rooms 100% variable 0.75 89
Kitchen + 4 additional wet rooms 100% variable 0.98 88

Figures taken from the BRE Test Results.

*Number of wet rooms is based on SAP Q test criteria and does not correlate directly with regulatory performance requirements.

Noise Performance - click here for the acoustic test results.

Performance of the Eco versions may differ slightly and are available on request.

 

 

Product Code

HRV1.25 Q Plus - TP406A - Energy Rating A

HRV1.25 Q Plus HMB Eco auralite® ready - TP406HMB - Energy Rating A

HRV1.25 Q Plus B Eco aura controls ready - TP416B/LH (left hand config) or TP416B/RH (right hand config) - Energy Rating A

Filters:(Standard and Eco)
XP40032/099 - G3 Filters fitted as standard
XP46022/099 - G4 Filters fitted on request

Standards

Conforms to requirements of UK statutory Building Regulations and Technical Standards for Ventilation and BRE 398
SAP Appendix Q tested (www.sap-appendixq.org.uk)
Exceeds requirements of Building Regulations Approved Document L (England & Wales)
EU RoHS Directive compliant
Conforms to requirements of EC council directives relating to Electromagnetic Compatibility and Electrical Safety: 2006/95/EC (LVD)
2004/108/EC (EMC)
EN 60335-1:2002/A2:2006
EN 60335-2-80:2003/A1:2004
CE Marked.
Other non-UK info available on request

Specification

Dimensions: 600mm wide x 430mm high (excluding ports) x 285mm deep (295mm with mounting bracket)
Weight: 16kg
Finish: White Paint
Materials:
Housing: Zintec sheet steel housing, powder coated white  
Internals: Expanded polypropylene (EPP)
Heat Exchanger: Polystyrene
Internal insulation: Closed cell foamed Nitrile rubber, class ‘O’ fire rating
Standard filters: Grade G3 synthetic filters, flame resistance to BS5588
Guarantee period: 3 years (UK only)
Electrical: 230V ~ 50/60Hz, 3A fuse
Installation: Install in accordance with Good Practice, such as the Domestic Ventilation Compliance Guide (England & Wales) and the Residential Ventilation Association recommendations
Maintenance
: Service and filter clean/replacement subject to local environment - see Product Manual

More information

ventsales@titon.co.uk / 01206 713800

 


Nominal fan performance

Nominal fan performance - Eco versions

All units offer 100% variable speed control.
*@FID(0 Pa)

 

 

Documentation