ventilation-systems

Trimbox NO2 FilterĀ®


Trimbox NO2 Filter Trimbox NO2 Filter The Titon Trimbox NO2 Filter® reduces Nitrogen Dioxide (NO2) which is predominantly produced by exhaust gases from diesel engines.

Due to this pollution arising in cities and urban areas there is a need to implement mitigation measures to improve the indoor air quality (IAQ). The Trimbox NO2 Filter® is an effective means of reducing high NO2 to an acceptable mean annual concentration level of 40µg/m3.

Features & Benefits

  • Effective in reducing pollutants in the home, improving Indoor Air Quality (IAQ) and reducing the risk of Toxic Home Syndrome
  • Low pressure drop
  • Low cost
  • Optional F7 filter can be installed to further improve IAQ
  • Compact design
  • Compatible with Titon’s range of MVHR units
  • Fully lined box to reduce duct bound noise and condensation
  • The unit can be installed in both intake air and supply ducting
  • Fitted with either 3 or 4 active carbon filters  
  • F7 filter reduces up to 95% of PM2.5 particles
  • G4 filter reduces 100% of PM10/35% of PM2.5 particles
  • 98% NO2 reduction at pre filter concentrations of ≈ 200μg m³
  • Effective silencer
  • Third party tested for both NO2 and Acoustic reductions.

 

 

HouseBuilder Product Awards 2016 Winner

 

Trimbox NO2 filter

 

 

 

 

HRV10 Q Plus dimensions

 

 

 

Product Code

Unit One:
TP550 220 x 90 TP552 Ø160 TP554 Ø150

Unit Two:
TP551 220 x 90 TP553 Ø160 TP555 Ø150

Standards

Conforms to the EU Directive 2008/50/EC (the CAFÈ Directive) and to The Building Regulations Part F.

Testing Kits

Nitrogen Dioxide Rapid Air Monitor Testing Kits are available to purchase directly from Gradko International or contact via email Diffusion@gradko.com or call +44 1962 860 331.

Specification

Nominal Airflows: These units are available in a 29 l/s and 45 l/s options
Dimensions: 350mm wide x 690mm high (excluding ports) x 205mm deep
Port Dimensions: Rectangular: 220mm x 90mm
Round: Ø150 and Ø160
Finish: White Paint
Materials: Housing: Zintec sheet steel housing, powder coated white.
Internals: Zintec sheet steel Pre-Filter: Grade G4 synthetic filters as standard, F7 optional.
Active Carbon Filter: Honeycomb matrix constructed filter filled with granular active carbon.
Internal insulation: Closed cell foamed nitrile rubber, class 'O' fire rating. Installation: Install in accordance with Good Practice, such as the Domestic Ventilation Compliance Guide (England & Wales) and the Residential Ventilation Association recommendations.
Maintenance: Service and filter cleaning/replacement subject to local environment - see product manual.
Accessories: Rectangular to round duct connections.
Replacement pre-filters and active carbon filters

More information

ventsales@titon.co.uk / 01206 713800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 Resistance - Trimbox NO2 Filter - G4 Prefilter, Unit One

 

Resistance - Trimbox NO2 Filter - G4 Prefilter, Unit Two