Maco C-TS Door Lock

Multi-point security locking system

For use on PVCu, timber or composite doors with a 16mm Eurogroove

Maco C-TS

MACO Protect C-TS is a highly secure combined lift lever and split spindle door lock. It enables the fabrication of a wide range of easy to operate door styles from an individual highly secure door lock. The spindle type controls the function of the lock, solid spindle bar for lift lever function and split spindle pack for split spindle function.

Features & Benefits

  • 35mm and 45mm backsets available.
  • Single door lock for use as a lift lever or split spindle operated door lock (split spindle sold seperately).
  • Smaller compact central lockcase.
  • Single and double door configurations available - including double door, mullion free version.
  • Dead bolt operated from lever handle reducing force required to lock door.
  • Non-handed lock design.
  • Suitable for sprung and unsprung handle sets.
  • Forged steel dead locking hook bolts for increased security.
  • High levels of adjustability through adjustable striker plates and locking cams.
  • Security can be further increased with top and bottom shootbolts.
  • Faceplate lengths available 2200mm for single doors, 1800mm for double doors and 1500mm slave door lock.
  • Endurance tested to 50,000 operations.
  • PAS24-2012 security tested.
  • MACO silver look surface treatment tested to 480 hours Class 5 EN 1670 corrosion resistance.
  • Available in MACO TriCOAT Plus surface technology - phone for details.
  • 16mm and 20mm faceplate available (3mm thick).
  • Locking options: 2 hook, 2 hook-cam and 2 hook-cam + 2 cam.
  • Standard 1050mm handle height.
  • 92mm handle to cylinder centres.
  • 8mm square shaft.

C-TS Line Drawing


Adjustable cam for compression.

Hook Bolt

For optimum security.

Striker Plates

Profile specific.

Produced from high quality zinc and steel.

Adjustable individual or single piece.

Available for both 1800mm and 2200mm locks.

Contact Technical for codes.

Manufactured From

Produced from high quality zinc and steel.

Recommended Screws

No.8 countersunk or equivalent.

For TriCOAT finish ensure Tricoat screws are used.


PAS 24 and BS6375 Parts 1 & 2.

BS EN 1670.


Silver Chromate.

Tricoat (high corrosion resistance) also available.

More information / 01206 713801