Maco CT-S Module Door Lock

Multi-point security locking system

For use on PVCu, timber or composite doors with a 16mm Eurogroove

Maco Protect C-TS Module is a highly secure combined lift lever and split spindle door lock. It enables the fabrication of a wide range of easy to operate door styles from an individual highly secure door lock. The spindle type controls the function of the lock, solid spindle bar for lift lever function and split spindle pack for split spindle function. Utilises the CTS lockcase, which enhances door flexibility whilst simplifying door preparation.

Features & Benefits

  • 35mm and 45mm backsets available.
  • Single door lock for use as a lift lever or split spindle operated door lock (split spindle sold seperately).
  • Smaller compact lockcases.
  • Single and double door configurations available.
  • Dead bolt operated from lever handle reducing force required to lock door
  • Non-handed lock design.
  • Suitable for sprung and unsprung handle sets.
  • Forged steel dead bolt locking hook bolts for increased security.
  • High levels of adjustability through adjustable striker plates.
  • Faceplate lengths available 2100mm and 1750mm for Bull Nose.
  • Endurance tested to 50,000 operations.
  • PAS24-2012 capability.
  • MACO silver look surface treatment tested to 480 hours Class 5 EN 1670 corrosion resistance.
  • Available in MACO TriCOAT Plus surface technology - phone for details.
  • 3mm thick faceplate.
  • Standard 1050mm handle height.
  • Double door configuration: 1500mm door lock to suit shootbolts - non modular.
  • Unique top hat faceplate design, 24mm wide to suit 16mm Eurogroove.
  • Modular design to increase or reduce heights from 1500mm to 2800mm including:
    - additional hook bolt modules.
    - additional dead bolt (cylinder operated) module.
    - magnetic cam for alarm systems.
    - entry guard unit.
  • Bull Nose, radius end faceplate option (20mm).
  • 92mm handle to cylinder centres.
  • 8mm square shaft.



unique top hat face plate

Unique top hat face plate

Bull nose option

Bull nose option

Additional dead bolt lockcase

Additional dead bolt lockcase

Additional hook bolt lockcase

Additional hook bolt lockcase

C-TS Module Line Drawings

Hook Bolt

For optimum security.

Striker Plates

Profile specific.

Produced from high quality zinc and steel.

Contact Technical for codes.

Manufactured From

Produced from high quality zinc and steel.

Recommended Screws

No.8 countersunk or equivalent.

For TriCOAT finish ensure TriCOAT screws are used.


PAS 24 and BS6375 Parts 1 & 2.

BS EN 1670.


Silver Chromate.

TriCOAT (high corrosion resistance) also available.

More information / 01206 713801